ROBINS AIR FORCE BASE, Ga. – Larry Richardson, right, and Michael Bodrey, both 573rd CMXS machinists, mount a C-130H aircraft propeller to a Makino T-4 5-axis computer numerical control milling machine at Robins Air Force Base, Georgia, March 30, 2022. Each C-130H propeller is inspected for serviceability and has the taper bore overhauled to fit an oversized bushing. (U.S. Air Force photo by Joseph Mather)

ROBINS AIR FORCE BASE, Ga. – Wesley Ellis, 573rd CMXS Computer Numerical Control Machine section work lead, points to a where a center shoulder wing rib is located in an F-15 aircraft wing at Robins Air Force Base, Georgia, March 30, 2022. The ribs provide structural support to the wing and each rib produced can have a slight variation due to its placement in the wing. (U.S. Air Force photo by Joseph Mather)

ROBINS AIR FORCE BASE, Ga. – Philip Trauth, 573rd CMXS machinist, describes how he mounts raw material into a Makino T-4 5-axis computer numerical control milling machine to manufacture an F-15 aircraft center shoulder wing rib at Robins Air Force Base, Georgia, March 30, 2022. A piece of aluminum close to the size and shape of the aircraft part, called a forging piece, is milled down by a CNC milling machine to make each F-15 aircraft center shoulder wing rib. (U.S. Air Force photo by Joseph Mather)

The Warner Robins Air Logistics Complex at Robins Air Force Base, Georgia, is one of three sustainment complexes in the Air Force that keeps our nation’s aerial assets capable of meeting our warfighter’s needs globally.

573rd CMXS: Supporting the sustainment mission through quality m ROBINS AIR FORCE BASE, Ga. – Larry Richardson, left, and Michael Bodrey, both 573rd CMXS machinists, inspect a C-130H aircraft propeller taper bore at Robins Air Force Base, Georgia, March 30, 2022. Each C-130H propeller is inspected for serviceability and has the taper bore overhauled to fit an oversized bushing. (U.S. Air Force photo by Joseph Mather) Photo Details / Download Hi-Res The 573rd Commodities Maintenance Squadron Machine Flight with the 402nd Commodities Maintenance Group provides those specialized machined parts, which keep those aircraft flying.

ROBINS AIR FORCE BASE, Ga. – Larry Richardson, left, and Michael Bodrey, both 573rd CMXS machinists, inspect a C-130H aircraft propeller taper bore at Robins Air Force Base, Georgia, March 30, 2022. Each C-130H propeller is inspected for serviceability and has the taper bore overhauled to fit an oversized bushing. (U.S. Air Force photo by Joseph Mather)

James Pullen, 573rd CMXS Machine Flight Computer Numerical Control Machine section supervisor said, the 573rd CMXS performs depot level maintenance on F-15, C-17, C-17, C-130 and JSTARS E-8C aircraft structural components by utilizing state of the art computerized numerical controlled milling systems.

“Our programing group takes engineering drawings to design programs for our various CNC multi-axis milling machines,” he said. “We then utilize raw materials to create any type of aircraft parts for the sustainment mission at Robins.”

Pullen said some broken parts do not have drawings to create a new part.

“At times we have had broken parts come from an aircraft and we take those to the additive manufacturing section to have a diagram created of the part,” he said. “They create programs to make the part. That program is used to manufacture the part out the material required such as aluminum, steel or titanium and we will machine that part to go back on to the waiting aircraft.”

James Ellis, 573rd CMXS Machine Flight CNC Machine section work lead said 70 percent of the time the shop makes parts for the supply system.

“We provide machined parts to fill supply requests to the Defense Logistics Agency customers around the world,” he said. “The other 30 percent of the time we make replacement parts for aircraft that needs them now in support of the sustainment mission.”

573rd CMXS: Supporting the sustainment mission through quality m ROBINS AIR FORCE BASE, Ga. – Philip Trauth, 573rd CMXS machinist, monitors a Makino T-4 5-axis computer numerical control milling machine as it manufactures an F-15 aircraft center shoulder wing rib at Robins Air Force Base, Georgia, March 30, 2022. During the manufacturing process, a forging piece of aluminum is used to machine the center shoulder wing rib and takes approximately 22 hours complete. (U.S. Air Force photo by Joseph Mather) Photo Details / Download Hi-Res Pullen said you typically see these type of set ups in the automotive industry.

ROBINS AIR FORCE BASE, Ga. – Philip Trauth, 573rd CMXS machinist, monitors a Makino T-4 5-axis computer numerical control milling machine as it manufactures an F-15 aircraft center shoulder wing rib at Robins Air Force Base, Georgia, March 30, 2022. During the manufacturing process, a forging piece of aluminum is used to machine the center shoulder wing rib and takes approximately 22 hours complete. (U.S. Air Force photo by Joseph Mather)

“The ideal situation is to set up the CNC milling machine and run them around the clock pumping out a particular type of part,” he said. “We have that same capability here at Robins because of the complexity of the parts that come to us.”

Having the CNC milling systems are imperative to the sustainment mission Robins, said Pullen.

“This is important to the mission because as a depot we have the capability of machining any part for the base and the Air Force,” he said. “We don’t have to go through an outside contractor or outside supplier for parts or repairs.”

Ellis said everything we do is important to the sustainment mission.

“This provides us a quick opportunity to be able to produce parts for aircraft and keep the sustainment process moving or to get an aircraft back on its mission,” he said.

Pullen said his team makes a lot of complex parts.

“I have worked in the aircraft industry for 37 years,” he said. “It makes me feel good when I come in and can instill in the new employees my knowledge and experience to support the long-term mission of our country. That to me is exciting and rewarding at the same time.”